93
- Device Ports
Serial Port
The serial port, or COM port, located on the system and on the optional Port Replicator allows you to
connect serial devices, such as printers or scanners. In order to connect a serial interface device follow
these easy steps:
1 Align the connector with the port opening.
2 Push the connector into the port until it is seated.
3 Tighten the two hold-down screws, located on each side of the connector.
Connecting a Serial Device
Port Replicator Connector
The port replicator connector is used for the connection of your notebook to an optional port replicator.
In order to connect your notebook to this device, follow the instructions that came with your port
replicator.
To Next Page
Loading...
