40
- Starting Your LifeBook Notebook
Several additional windows will appear, prompting you to enter a name and description for your computer,
an Administrator password, and a domain name. Read the instructions on the screens carefully and fill in
the information as directed. Once you have finished with the setup, it is very important that you install
Click Me!, as detailed below.
Installing Click Me!
The first time you boot up your system, you will see an icon called Click Me! in the Start menu. It is very
important that you run the Click Me! utility the first time you boot up in order to ensure that the
necessary applications, utilities. and drivers are installed. When you click the Click Me! icon, your
system will automatically create the related icons in the system tray in the bottom right of the screen.
These icons provide links to utilities that you will frequently access.
When you install the Click Me! utility, several applications and utilities are installed; this takes time.
While Click Me! is installing, the system may go into Suspend mode (as indicated by a blinking
power light). If this should occur, slide the Power/Suspend/Resume button momentarily to wake the
system up. Alternately, while Click Me! is installing, slide your finger across the touchpad every few
minutes to keep the system awake.
BEFORE INSTALLING THE CLICK ME! UTILITY, BE SURE THE WIRELESS LAN DEVICE IS ENABLED BY
CLICKING THE [FN]+[F5] KEY COMBINATION. WHEN THE WIRELESS IS ENABLED, THE WIRELESS STATUS
I
NDICATOR WILL GLOW.
T
HERE MAY BE SOME THIRD-PARTY APPLICATIONS THAT DO NOT GET INSTALLED USING THE CLICK ME!
UTILITY. FOR MORE INFORMATION, REFER TO YOUR GETTING STARTED GUIDE.
ClickMe!
To Next Page
Loading...
