17
Getting Started
Power Sources
Your Fujitsu LifeBook notebook has two
possible power sources: a Lithium ion
battery or an AC adapter.
CONNECTING THE AC ADAPTER
The AC adapter provides power for oper-
ating your LifeBook notebook and is used
to charge the batteries.
Connecting the AC Adapter
1. Plug the DC output cable into the DC
power jack of your LifeBook note-
book.
2. Plug the AC cable into the AC adapter.
3. Plug the AC cable into an AC electrical
outlet. (Figure 3-1)
Switching from AC Adapter Power to
Battery Power
1. Be sure that you have a charged battery
installed.
2. Unplug the AC adapter.
Figure 3-1. Connecting the AC Adapter 1
2
DC Power Jack
DC Output Cable
3
4
AC Adapter
AC Cable
1
2
3
4
■
When you run the
N6200 Series LifeBook
on battery power, by
default, the CPU will
slow down approxi-
mately by half in order
to optimize battery life.
This feature can be
enabled or disabled in
the BIOS. Use an AC
Adapter whenever
possible.
■
The Lithium ion battery
is not charged upon
purchase. Initially, you
will need to connect the
AC adapter to use your
LifeBook notebook.
To Next Page
Loading...
