26
LifeBook N Series User’s Guide
5. Replace the cover by following steps 9
and 10 of Installing a Memory
Upgrade Module.
CHECKING THE MEMORY
CAPACITY
Once you have changed the system
memory capacity by either adding or
removing a memory upgrade module, be
sure to check that your notebook has
recognized the change.
You can check the memory capacity by
clicking [Start] -> Control Panel, then
double-clicking the System icon. Select the
General tab and check the amount of
memory under “Computer.”
Device Ports
Your LifeBook notebook comes equipped
with multiple ports to which you can
connect an external device including: disk
drives, keyboards, modems, printers, etc.
COMMUNICATIONS PORTS
Your LifeBook has a Modem jack (RJ-11)
and a LAN jack (RJ-45) to accommodate
external communications.
Modem (RJ-11) Telephone Jack
The modem (RJ-11) telephone jack is used
for your internal modem. To connect the
telephone cable follow these easy steps:
(Figure 4-8)
1. Align the connector with the port
opening.
2. Push the connector into the port until
it is seated.
3. Plug the other end of the telephone
cable into a
telephone outlet.
Figure 4-8. Connecting the Modem
If the total memory
displayed is incorrect, check
that your memory upgrade
module is properly installed.
To Next Page
Loading...
