Removing and installing components
during servicing
Installing a hard disk
If you are installing more than one component at the same time , keep the screws for
the individual components separately from each other and make sure that you use the
correct screws. If you install the wrong screws, components may be damaged.
3
3
1
2
► Place the hard disk into the hard disk com partme nt (1).
► Pushtheharddi
sk in the direction of the arrow (2) until the contacts engage.
► Fasten the screw s (3).
Fujitsu Technology Solutions 71
Downloaded from LpManual.com Manuals
To Next Page
Loading...
