167
OmniPass account to access his webmail, he would need to enter his original webmail credentials (“John_02” and
“lifebook”) to gain access. If he attempts his OmniPass user credentials on a system other than a system he’s enrolled
on, he will not gain access.
Basic Enrollment
The Enrollment Wizard will guide you through the process of enrolling a user. Unless you specified otherwise, after
OmniPass installation the Enrollment Wizard will launch on Windows login. If you do not see the Enrollment Wizard,
you can bring it up by clicking Start on the Windows taskbar; select Programs; select Softex; click OmniPass
Enrollment Wizard.
1 Click Enroll to proceed to username and password verification. By default, the OmniPass Enrollment Wizard enters
the credentials of the currently logged in Windows user.
2 Enter the password you use to log in to Windows. This will become the “master password” for this OmniPass user.
In most cases, the Domain: value will be your Windows computer name. In a corporate environment, or when
accessing corporate resources, the Domain: may not be your computer name. Click [Next] to continue.
3 In this step OmniPass captures your fingerprint. Refer to “Enrolling a Fingerprint” on page 168 for more details.
4 Next, choose how OmniPass notifies you of various events. We recommend you keep Taskbar Tips on Beginner
mode taskbar tips and Audio Tips on at least Prompt with system beeps only until you get accustomed to how
OmniPass operates. Click [Next] to proceed with user enrollment. You will then see a Congratulations screen
indicating your completion of user enrollment.
5 Click [Done] to exit the OmniPass Enrollment Wizard. You will be asked if you’d like to log in to OmniPass with
your newly enrolled user; click [Yes].
THE ENROLLMENT PROCEDURE ASSUMES YOU HAVE NO HARDWARE AUTHENTICATION DEVICES OR ALTERNATE STORAGE LOCATIONS THAT YOU WISH
TO INTEGRATE WITH OMNIPASS. IF YOU DESIRE SUCH FUNCTIONALITY, CONSULT THE APPROPRIATE SECTIONS OF THIS DOCUMENT.
To Next Page
Loading...
