37
Windows 8:
1 Go to start screen
2 Right click on start screen
3 Click "All Apps", then select "Run" from the list
4 Type in: C:\Program Files\Fujitsu\Security Panel
Application\Supervisor\FJSECS.EXE, then press [Enter]
5 Follow the on-screen instructions to set the Supervisor password.
Setting User Password
Windows 7:
1 Go to the Start menu and select All Programs.
2 Select Security Panel Application and Set User Password.
3 Follow instructions to set the user password.
Windows 8:
1 Go to start screen
2 Right click on start screen
3 Click "All Apps", then select "Security Panel Application".
Operating Your LIFEBOOK Security/Application Panel
The security lock feature is in effect both when the system resumes from Off or Hibernation state. You will need to
enter the user password right after pressing the Suspend/Resume button. Your system will not begin the boot
sequence until you enter your supervisor/user password.
YOU MAY CHANGE OR REMOVE THE SUPERVISOR OR USER PASSWORD BY REPEATING THE STEPS DEFINED ABOVE.
To Next Page
Loading...
