60
3 With the system oriented as shown in Figure 15, push and hold the battery bay release lock away from the battery
pack, and slide the battery release button to the right. This will unlock the battery. At the battery lift point, lift
the battery out of the bay.
4 Insert a new battery into the bay. Push and hold the battery bay release lock away from the battery pack, and
slide the battery release button to the left. This will lock the battery.
5 Plug in the AC adapter and turn the power on.
Figure 15. Removing a Battery
Hot-swapping Batteries
To hot-swap batteries in your battery bay, follow these easy steps:
BE SURE TO PLUG IN AN AC ADAPTER PRIOR TO REMOVING THE BATTERY. THERE IS NO BRIDGE BATTERY PRESENT TO SUPPORT THE SYSTEM WHILE
THE BATTERY IS BEING REPLACED. IF YOU DO NOT USE AN AC ADAPTER YOU WILL LOSE ANY UNSAVED FILES.
To Next Page
Loading...
