Fujitsu LIFEBOOK T730 - Page 93

92 - Memory Upgrade Module
7 Insert the memory upgrade module at a 45° angle. Press the connector edge of the module firmly down and
into the connector until it lodges under the retaining clip. You’ll hear a click when it is properly in place.
8 Replace the cover and reinstall the screws.
Figure 39. Opening Memory Compartment Figure 40. Installing a Second Memory Module
Retaining Clip
THE MEMORY UPGRADE MODULE IS NOT SOMETHING YOU ROUTINELY REMOVE FROM YOUR TABLET
PC. O
NCE IT IS INSTALLED, YOU CAN LEAVE IT IN PLACE UNLESS YOU WANT TO CHANGE SYSTEM
MEMORY CAPACITY.
Curlin_WWAN-B6FJ-5051-02ENZ)-00.book Page 92 Tuesday, October 19, 2010 1:57 PM