48
- Touchpad/Active Digitizer/Touchscreen
Clicking on Active Digitizer Display
To left-click, touch the object you wish to select and
then lift the stylus tip immediately.
Figure 25. Clicking on the Active Digitizer Display
Figure 26. Right-clicking Active Digitizer
Right-Clicking on Active Digitizer
Right-click can be accomplished by holding the
front of the toggle button down while tapping on
the screen. To change the settings for the right-
click feature, go to Start -> Control Panel -> Pen
and Touch. In the Pen Options tab, select “Press
and Hold” then click the [Settings] button.
Claw T731 UG.book Page 48 Wednesday, May 25, 2011 3:50 PM
To Next Page
Loading...
