Top Latch
Bottom
Latch
Display Side
Rotating Display
Power/Suspend/
Resume Switch
Wireless Device Switch
Display Latch
Display Panel
Latch Button
Power/Suspend/
Resume Switch
DC Power Jack
AC Adapter
Connecting the LAN
LAN Jack
3
1. Open the Display Panel
• Ensure that your LIFEBOOK is on a hard level surface and that the
air vents are not blocked.
• Press the release latch and carefully lift the display, and adjust
until it is at a comfortable viewing angle.
2. Convert from Notebook to Tablet
• Open your tablet PC and lift the display so it is perpendicular
to the keyboard.
• Rotate the display 180 degrees (either direction).
• Push the latch down toward the display.
• Carefully fold the display down onto the keyboard.
• Reverse this procedure to return to the notebook configuration.
Be sure to rotate the display in the opposite direction.
3. Connect AC Power
• Plug the power cord into the AC adapter.
• Plug the AC adapter into your tablet PC.
• Connect the power cord to an electrical outlet.
4. Turn on Power
• Slide and release the Power/Suspend/Resume switch.
• The notebook is now on and the battery is being charged.
•
The notebook will begin a power-on self test. Once successfully completed,
the operating system will begin the initialization process.
5. Starting Windows
®
for the First Time
• Accept the Microsoft
®
Windows
®
Licensing Agreement and the Fujitsu
End User License Agreement to proceed. Select your User ID (optional)
and Password during the “Welcome Screen.” Keep a record of your User
ID and password stored in a secure place. THE SCREEN WILL GO DARK
FOR SEVERAL MINUTES. Do not attempt to turn power on or off during
this stage.
6. Activate Additional Utilities,
Applications, & Drivers
• Move the WLAN switch to the on position (to configure WLAN and
Bluetooth) and check to be sure your LIFEBOOK is NOT connected to
the network or the Internet. The Pen and touch (Select configurations)
functions will not be calibrated until Click Me! is activated.
Ensure that the AC adapter is connected and supplying power to your
notebook before activating Click Me! It will take 25 to 30 minutes for
Click Me! to install and configure your drivers and utilities.
• In addition to an icon on the desktop, a dialog box will
automatically open that prompts you to run Click Me!.
If you choose not to run Click Me! at this time, the
Click Me! icon will appear on your desktop. When you
click the Click Me! icon, your system will automatically
build the icon tray in the bottom right of the screen.
These icons provide links to utilities that you will
frequently access.
Initial Start Up
To avoid possible damage to your computer, be sure
the display panel is perpendicular to the keyboard
before rotating it.
The lithium ion battery is not charged upon purchase.
Initially you will need to connect either the AC adapter
or Auto/Airline adapter to use your notebook.
When configuring Windows
®
7, skip the step to setup
the WLAN. Otherwise, there may be issues when
activating Click Me!.
Check to be sure that your LIFEBOOK is NOT
connected to a network or the Internet.
“Click Me!”
(For
Additional
Applications
and Utilities)
Caution
Caution
Caution
To Next Page
Loading...
