To Next PageTo Next PageHow to fix a blank LCD screen on a Fujitsu LifeBook T902?
If your Fujitsu Tablet's LCD screen remains blank, the monitor might be switched off. Try pressing a key or touching the touchpad. Also, if an external monitor or television is connected, press the key combination to switch the screen output.
What to do if my Fujitsu LIFEBOOK Tablet PC doesn’t turn on?
If your Fujitsu LIFEBOOK Tablet PC doesn't turn on, start by checking the Status Indicator Panel for the battery's condition. Install a charged battery or power adapter if needed. If the battery is faulty, remove it and try another power source. Ensure the power adapter is correctly plugged in and the outlet has power. If using an auto/airline adapter, make sure the ignition switch is in the On or Accessories position. If the adapter is faulty, try a different one.
What to do if suspend/resume slide does not work on Fujitsu LifeBook T902?
If the suspend/resume slide on your Fujitsu Tablet PC doesn't work, ensure it is enabled by going to Control Panel -> Power Options Properties and clicking the Advanced tab. In the Power buttons area, select “Change what the power button does”. If the issue persists, close all applications and try the button again, as there may be application software conflict.
What to do if Fujitsu Tablet PC doesn't turn on in Port Replicator?
If your Fujitsu Tablet PC does not turn on when installed in the optional Port Replicator, ensure the Port Replicator AC adapter is plugged in and providing power. Also, remove and re-dock your LIFEBOOK Tablet PC to ensure it is properly seated in the Port Replicator.
Why battery indicator does not illuminate on my Fujitsu LifeBook T902 Tablet?
If the battery indicator on your Fujitsu Tablet isn't lighting up, it could be due to a couple of reasons. First, the battery might not be correctly installed. Turn off the tablet, check the battery's placement in its compartment, and then turn the tablet back on. Second, the battery could be fully discharged. In this case, charge the battery, install a charged one, or connect the tablet to a power outlet using the mains adapter.
Why does the battery discharge too quickly on my Fujitsu Tablet?
If your Fujitsu Tablet battery is draining quickly, it could be due to several factors. The battery might be too hot or too cold, which can cause the battery indicator to flash. Try to bring the tablet to a normal temperature. If the battery is old, consider replacing it. Also, some applications consume a lot of power by frequently accessing the hard disk or optical drive, so use the mains adapter when possible. Finally, reducing the screen brightness can also help conserve battery power.
How to fix radio connection if it does not work on Fujitsu LifeBook T902?
If the radio connection to a network isn't working on your Fujitsu Tablet, first ensure that the wireless component is enabled. If it is enabled but the connection still doesn't work, check whether the radio connection is switched on via the software.
What to do if external monitor remains blank when connected to Fujitsu LifeBook T902?
If the external monitor remains blank when connected to your Fujitsu Tablet, first ensure that the monitor is switched on. If power saving has been activated, press any key to continue. Check the brightness settings of the monitor, and adjust if necessary. Also, verify that the screen output is correctly set, and if not, press the key combination to switch the screen output. Finally, switch off the external monitor and the tablet, then check the power and data cable connections before switching them back on.
Why my Fujitsu LIFEBOOK Tablet PC doesn't recognize DVD/CD-RW/CD-ROM’s?
If your Fujitsu Tablet PC fails to recognize DVD/CD-RW/CD-ROM’s, first, ensure the disc is properly installed on the raised center circle of the drive. Check that the optical drive tray is latched shut. If not, pull out the modular drive latch and re-insert the drive. Ensure the correct DVD Player software is installed. Wipe the disc with a non-abrasive CD cleaning cloth. Verify the drive designator used by the application matches the one used by the operating system.
What to do if Fujitsu LIFEBOOK doesn’t recognize USB device?
If your Fujitsu LIFEBOOK doesn’t recognize a USB device, first remove and reinstall the device. Then, check your software documentation and activate the correct driver. If the device was installed while an application was running, close the application and restart your Tablet PC.
General| Form factor | Convertible (Swivel) |
|---|---|
| Product type | Hybrid (2-in-1) |
| Product color | Black, Silver |
| Bus type | DMI |
| Stepping | L1 |
| Tjunction | 105 °C |
| Processor cache | 4 MB |
| Processor cores | 2 |
| Processor model | i7-3520M |
| System bus rate | 5 GT/s |
| Processor family | Intel® Core™ i7 |
| Processor series | Intel Core i7-3500 Mobile series |
| Processor socket | BGA 1023 |
| Processor threads | 4 |
| Processor codename | Ivy Bridge |
| Processor frequency | 2.9 GHz |
| Processor cache type | Smart Cache |
| Processor lithography | 22 nm |
| Processor manufacturer | Intel |
| Processor front side bus | - MHz |
| PCI Express slots version | 3.0 |
| Processor boost frequency | 3.6 GHz |
| Processor operating modes | 64-bit |
| ECC supported by processor | No |
| PCI Express configurations | 1x8, 1x16, 2x4, 2x8 |
| Thermal Design Power (TDP) | 35 W |
| CPU multiplier (bus/core ratio) | 29 |
| Maximum number of PCI Express lanes | 16 |
| Motherboard chipset | Intel® QM77 Express |
| Ambient light sensor | Yes |
| Memory slots | 2x SO-DIMM |
| Internal memory | 4 GB |
| Memory clock speed | 1600 MHz |
| Memory form factor | SO-DIMM |
| Internal memory type | DDR3-SDRAM |
| Maximum internal memory | 16 GB |
| Storage media | - |
| Total storage capacity | - GB |
| Compatible memory cards | SD, SDHC, SDXC |
| Display surface | Matt |
| Display diagonal | 13.3 \ |
| Display brightness | 300 cd/m² |
| Display resolution | 1600 x 900 pixels |
| Native aspect ratio | 16:9 |
| Contrast ratio (typical) | 500:1 |
| On-board graphics card ID | 0x166 |
| On-board graphics card model | Intel® HD Graphics 4000 |
| On-board graphics card family | Intel® HD Graphics |
| On-board graphics card base frequency | 650 MHz |
| On-board graphics card dynamic frequency (max) | 1250 MHz |
| Power adapter depth | 56 mm |
| Power adapter width | 148 mm |
| Power adapter height | 32 mm |
| Power adapter weight | 250 g |
| Wi-Fi standards | 802.11a, 802.11b, 802.11g |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Charging port type | DC-in jack |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| eSATA/USB 2.0 ports quantity | 0 |
| Pointing device | Touchpad |
| Keyboard number of keys | 85 |
| Bundled software | Adobe Reader |
| Processor code | SR0MU |
| Processor ARK ID | 64893 |
| Processor package size | 37.5 x 37.5 (rPGA988B); 31.0 x 24.0 (BGA1023) mm |
| Supported instruction sets | AVX |
| Intel Identity Protection Technology version | 1.00 |
| Battery capacity | 6700 mAh |
| Battery life (max) | 7.7 h |
| Battery recharge time | 3 h |
| Number of battery cells | 6 |
| AC adapter power | 100 W |
| AC adapter frequency | 50 - 60 Hz |
| AC adapter input voltage | 100 - 240 V |
| AC adapter output current | 5.27 A |
| AC adapter output voltage | 19 V |
| Cable lock slot type | Kensington |
| Operating temperature (T-T) | 5 - 35 °C |
| Operating relative humidity (H-H) | 20 - 85 % |
| Sustainability certificates | RoHS, ENERGY STAR |
Weight and Dimensions| Depth | 244 mm |
|---|---|
| Width | 326 mm |
| Weight | 1890 g |
| Height (rear) | 31 mm |
| Height (front) | 27.1 mm |
