Fujitsu LIFEBOOK U7411 - Removing the LTE Module

Page 15 of 49
Only intended for authorised service
technicians
Removing the LTE module
Required work steps:
■ Switching off the battery
■ Removing the lower assy
■ Removing the battery
Required tools:
■ Screwdriver: Phillips PH00
■ Plastic tool
► Position of the LTE module (red frame).
► Loosen and remove the screw M2XL2.5 (yellow circle).
► Carefully pull both WWAN antennas from the LTE module (red circles).
To do so, use a suitable plastic tool.
► Now the LTE module is loose and can be carefully pulled out of the socket in the direction of the green arrow.