Fujitsu LIFEBOOK U7411 - Removing the LCD Hinges

Page 36 of 49
Only intended for authorised service
technicians
Removing the LCD hinges
Required work steps:
■ Switching off the battery
■ Removing the lower assy
■ Removing the battery
■ Removing the LCD assy
Required tools:
■ Screwdriver: Phillips PH00
► Open the hinges at an angle of approx. 90 degrees so that the screws of the hinges are easily accessible.
► Loosen and remove the two M2.5-L2.5 screws (yellow circles) and the two M2.5XL5-1 B screws (red circles).
► Now the hinges can be removed.
Return to Table of Contents