Fujitsu LIFEBOOK U7411 - Removing the Fan

Page 21 of 49
Only intended for authorised service
technicians
Removing the fan
Required work steps:
■ Switching off the battery
■ Removing the lower assy
■ Removing the battery
Required tools:
■ Screwdriver: Phillips PH00
■ Plastic tool
► Loosen and remove the two screws M2XL2.5 (yellow circles).
Carefully pull the fan cable (red frame) out of the socket in the direction of the green arrow. Use a suitable plastic tool if
necessary.
► Now the fan can be lifted up and out of the device.
Return to Table of Contents