Fujitsu LIFEBOOK U7411 - Connecting the Mains Adapter

Page 24 of 49
Only intended for authorised service
technicians
Removing the CMOS battery
Required work steps:
■ Switching off the battery
■ Removing the lower assy
■ Removing the battery
Required tools:
■ Plastic tool
► Carefully pull the cable from the CMOS battery (red frame) out of the socket towards the green arrow.
Use a suitable plastic tool if necessary.
► Now the CMOS battery can be removed. This is glued on with double-sided adhesive tape and can be easily removed.
Return to Table of Contents