Disposal information for recycling companies
These instructions are for the complete dismantling of a Fujitsu product. All materials can thereby be disposed of according to their
provision in the EC directive 2012/19/EC (Waste Electrical and Electronic Equipment (WEEE)).
Materials which must be disposed of in a special manner
Printed circuit boards with a surface
area greater than 10 cm²
Mainboard
AC adapter
LCD
SSD
Memory
Touch Pad
Depending on system configuration:
Port replicator
Mouse
WWAN
Lithium-ion battery
- Method of attchment: Detachable
- How to remove: Open the cover
- Special tool for removal: None
Lithium button batteries CR2032
- Included on the mainboard
Components containing mercury
Liquid crystal displays (if applicable,
together with the casing) with a
surface area greater than 100 square
centimetres and backlit displays with
gas discharge lamps
> 100cm2 display: Not contained
Gas discharge lamps:
Capacitors containing PCBs
(PolyChlorinated Biphenyls)
Electrolytic capacitors which contain
critical substances (height > 25 mm;
diameter: > 25 mm or proportional
similar volumes).
External electrical cables
Chlorofluorocarbons (CFC),
hydrochlorofluorocarbons (HCFC) or
hydrofluorocarbons (HFC),
hydrocarbons (HC)