Security functions
Configuring the palm vein sensor
PalmveinsensorPalmveinsensor
Whether your device has a palm vein sensor depends on the device
configuration you have ordered.
The palm vein sensor can record the image of the pattern of the veins of the hand. This image
is evaluated by additional software and can be used instead of a password.
1
► To be a ble to use the palm vein sensor
(1), you must install the software.
The curren t A uthCo nd u cto r Clien t Ba sic software for hand vein and fingerprint sensor
is available on the Internet at "
https://support.ts.fujits u.com/"
After selecting the product and the operating system, you will find the software
under Down loads, Applications, Tools and Utilities.
Using the Security Lock
Your device comes with a S e curity Lock mechanism for the Kensington Lock Cable. You
can use the Kensington Lock Cable, a sturdy steel cable, to help protect your notebook
from theft. The Kensington Lock Cable is available a s an accessory.
Fujitsu recommends the use of a combination lock.
K
► Fit the Kensington Lock Cable to the
mechanism on your notebook.
UsingtheKensingtonLockCableSecurity LockMechan icalbackupAnti-theftpr otection
Attach another Kensington Lock Cable to your Port Replicator to protect
your Port Replicator from theft as w ell.
54 Fujitsu
To Next Page
Loading...
