Security functions
Password protection for booting of the operating system
With the supervisor password you have set in the BIOS Setup Utility (see
section "
Assigning the sup ervisor and user passwo rds", Page 56), you can
also preve nt starting of the operating system.
Operating system
Activating system protection
► Start the BIOS Setup Utility and go to the Security menu.
Operatingsystem
► Select the PasswordonBootoption and press the Enter key.
► Select the desired option (Disabled, First Boot or Every Boot) and press the Enter key
► Select the Save Changes & Exit option under Exit.
The noteboo k reboots. You w ill be prompted to enter your password (the supervisor password).
Deactivating system protection
► Start the BIOS Setup Utility and go to the Security menu.
Operatingsystem
► Select the PasswordonBootoption and press the Enter key.
► Select the Disabled option and press the Enter key.
If you d o not want to change any other settings, you can exit BIOS S etu p Utility.
► Select the Save Changes & Exit option under Exit.
The notebook will reboot. The system is no longer password-protected.
Password protection f or the drive
If a supervisor password has been assigned, a password for the drive can
also be set in the Hard Disk Security me nu.
The drive is protected by this password. Data from this drive can only be read into
another system if the correct password has been entered.
Fujitsu 57
To Next Page
Loading...
