Troubleshooting and tips
The notebook cannot be started
Notebook
Cause Troubleshooting
The battery is dead.
► Connect the notebook to the mains voltage
via the mains adapter and charge the
battery.
The power adapter is not connected correctly.
► Check whether the mains adapter is
connected correctly to the notebook.
► Switch the notebook on.
The notebook stops worki
ng
NotebookEnergysavingmode
Cause Troubleshooting
Notebook is in energy s
aving mode.
► Leave energy saving mo
de.
An application progr
amme has caused the
malfunction.
► Close the application program or restart
the notebook (by restarting the operating
system or switching the device off and back
on again).
The battery is dead.
► Connect the notebook to the mains voltage
via the mains adapter and charge the
battery.
The printer does not print
Printerdoesnot print
Cause Troubleshooting
The printer is not switched on. ► Make sure that the printer is switched
on and ready for operation (refer to the
documentation supplied with the printer).
The printer is not connected correctly.
► Check that the data cable connecting
the notebook to the printer is properly
connected.
The printer driver is faulty or not correctly
installed, or it is the wrong printer driver.
► Check that the data cable connecting
the notebook to the printer is properly
connected.
► Check whether the correct printer driver is
loaded (refer to the printer documentation).
Fujitsu 69
To Next Page
Loading...
