EasyManua.ls Logo

Fujitsu LifeBook UH572 - Power Management

Fujitsu LifeBook UH572
234 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32
- Starting Your LIFEBOOK Ultrabook
Starting Your LIFEBOOK Ultrabook
Power On
Power/Suspend/Resume Button
The Power and Suspend/Resume button is used to power on your LIFEBOOK Ultrabook, to resume from Sleep or Save-
to-Disk mode or to place your LIFEBOOK in Sleep or Save-to-Disk mode. (You can also use the button to power down the
system by holding it down for approximately five seconds. This can be useful if the system is “hung up”. This shouldn’t
be used as the normal means of shutdown, however.) You can also turn off your LIFEBOOK using the following method:
from Modern Start screen, open Charms ([Windows]+ C or mouse over [-] in the bottom right corner of the screen),
click [Settings]->[Power] Select Shut down from the list.
WHEN YOU TURN ON YOUR LIFEBOOK ULTRABOOK, BE SURE YOU HAVE A POWER SOURCE. THIS MEANS THAT THE BATTERY IS CHARGED, OR THAT
THE AC OR AUTO/AIRLINE ADAPTER IS CONNECTED AND HAS POWER.
Once you have connected your AC
adapter or charged the internal
Lithium-Polymer battery, you can
press this button to power up your
LIFEBOOK. (Figure 23)
Figure 23. Powering Up the System

Table of Contents

Related product manuals