47
- Secure Digital Card Slot
Figure 27. Installing an SD Card
Inserting SD Cards
SD Cards are inserted in the SD Card slot (Figure 27). To insert an SD Card, follow these steps:
1 See your SD Card manual for instructions on the insertion of your card.
2 Make sure there is no card currently in the slot. If there is, push it in slightly until it unlatches and pops out slightly,
then pull it from the slot.
3 Insert the card in an adapter, if required.
4 Insert your card into the slot with the product label facing up, then push the card firmly into the slot until it is
seated in the connector.
• INSERTING OR REMOVING AN SD CARD DURING YOUR LIFEBOOK’S SHUTDOWN OR BOOTUP PROCESS MAY DAMAGE THE CARD AND/OR YOUR
SYSTEM.
• DO NOT INSERT A CARD INTO A SLOT IF THERE IS WATER OR ANY OTHER SUBSTANCE ON THE CARD AS YOU MAY PERMANENTLY DAMAGE THE
CARD, YOUR LIFEBOOK, OR BOTH.
To Next Page
Loading...
