Preliminary 21(30)
Prepared Document Number
Manfred Ortmann
Approved Checked Date Revision Storage
2008-05-23 PA 6.2 Mycable01
2.2.10 Video Inputs
Pic. 2-15: Video input connectors
The Cinch video connectors X480 ( AVIN0 ) and X481 ( AVIN1 ) are connected directly to GDC
module interface connector X301 pin 35 and 37 ( Ground pin 33 and 34 ).
Two video inputs are available. The Cinch connector X500 for a colour video baseband signal
( CVBS ) and X501 ( FTSH-106-01-DV from Samtec ) for digital video inputs with ITU 656
format.
The analog input signals will be decoded to digital video signals with ITU 656 format from the 9-
bit video input processor SAA7113H ( U500 ) from Philips Semiconductors.
The outputs from the SAA7113H are connected to the video capture interface 0 from the JADE.
The SAA7113H will be controlled by I2C interface 0. The RTS0 pin from SAA7113H is strapped
to ground so the slave address for readings is 0x49 and the slave address for writings is 0x48.
To Next Page
Loading...
