Interface
5-40 C141-E192-01EN
Bit 10: '1' = Supports the Host Protected Area function.
Bit 9: '1' = Supports the DEVICE RESET command.
Bit 8: '1' = Enables the SERVICE interrupt. From the SET FEATURES
command
Bit 7: '1' = Enables the release interrupt. From the SET FEATURES
command
Bit 6: '1' = Enables the read cache function. From the SET FEATURES
command
Bit 5: '1' = Enables the write cache function.
Bit 4: '1' = Enables the P PACKET command set.
Bit 3: '1' = Supports the Power Management function.
Bit 2: '1' = Supports the Removable Media function.
Bit 1: '1' = From the SECURITY SET PASSWORD command
Bit 0: '1' = From the SMART ENABLE OPERATION command
*16 WORD 86
Bits 15: Reserved
Bit 13-10: Same definition as WORD 83.
Bit 9: '1' = Enables the Automatic Acoustic Management function.
From the SET FEATURES command
Bit 8: '1' = From the SET MAX SET PASSWORD command
Bits 7-6: Same definition as WORD 83.
Bit 5: '1' = Enables the Power-Up In Standby function.
Bit 4: '1' = Enables the Removable Media Status Notification function.
Bit 3: '1' = Enables the Advanced Power Management function.
Bits 2-0: Same definition as WORD 83.
*17 WORD 87
Bits 15: = '0'
Bits 14: = '1'
Bits 13-2: Reserved
Bit 1-0: Same definition as WORD 84.
To Next Page
Loading...
