Need help?Do you have a question about the Fujitsu ETERNUS LT20 S2 and is the answer not in the manual?
Outlines the manual's chapter structure and content.
General safety instructions and precautions for device operation.
Symbol indicating the risk of serious or fatal injury.
Symbol indicating the risk of personal injury or property damage.
Explains the meaning of various safety symbols used in the manual.
Procedures for handling abnormal conditions like heat, smoke, or unusual noise.
Guidance on device maintenance and authorized repair connections.
Precautions for handling the device, including cover removal and electrical hazards.
Safety guidelines for using power cables and plugs correctly.
Recommendations for placing the device in a suitable environmental setting.
Instructions for the proper disposal of the device and its packaging materials.
Specifies approved equipment that can be connected to the library.
Advises on using only designated expendable supplies for the device.
Prohibits unauthorized modifications or renovations of the device.
Guidelines and precautions for safely moving or relocating the tape library.
Safety precautions related to the LCD unit, including mercury content.
Warning against looking directly into the barcode reader light to prevent eye injury.
Explains supported operating systems and host bus adapters for the library.
Procedures for connecting and configuring the library on Solaris OS.
Procedures for connecting and configuring the library on Linux.
Procedures for connecting and configuring the library on Windows.
Steps to configure the operating system for the tape library.
Steps to configure backup software for the tape library.
Specific configuration steps for the tape library itself.
Configuration settings required for SAS connections to the library.
How to configure the link speed for Fibre Channel connections.
Setting topology and loop ID for direct host connections.
Setting topology for Fibre Channel connections via FC switches.
Host settings when using Fibre Channel Host Bus Adapters.
How to enable and use Mailslots for tape cartridge management.
Notes on setting up SAS connections for Solaris OS.
Notes on setting up Fibre Channel connections for Solaris OS.
Information on device drivers and patches for Solaris OS.
Steps to ensure the server correctly recognizes the connected device.
Notes on FC and SAS connections for Linux.
Notes on setting up SAS connections for Windows.
Notes on setting up Fibre Channel connections for Windows.
Instructions to stop the Removable Storage Manager service in Windows.
Procedure for reinstalling a device driver if it is not recognized.
General operational notes for using NetBackup.
How to use NetBackup's automatic cleaning function.
Specific notes for using NetBackup on Solaris OS.
Specific notes for using NetBackup on Windows.
How to set the media mount timeout parameter in NetBackup.
Guidelines for using batch files or shell scripts with NetBackup.
General operational notes for using NetWorker.
How to use NetWorker's automatic cleaning function.
Specific notes for using NetWorker on Solaris OS.
Specific notes for using NetWorker on Windows.
How to configure the registry for NetWorker with multiple tape drives.
General operational notes for IBM Spectrum Protect.
How to use IBM Spectrum Protect's automatic cleaning function.
Specific notes for using IBM Spectrum Protect on Solaris OS.
General operational notes for Backup Exec.
How to use Backup Exec's automatic cleaning function.
General operational notes for NetVault.
How to use NetVault's automatic cleaning function.
Settings for NetVault Backup 10+ using deviceconfig.
Settings for NetVault Backup 11.2+ using WebUI.
General operational notes for ARCserve Backup.
How to use ARCserve Backup's automatic cleaning function.
Notes for using ARCserve Backup on Windows Server 2019.
General operational notes for Veeam Backup & Replication.
How to clean tape drives with Veeam.
Veeam's recognition of cleaning media via barcode labels.
Potential conflict between Veeam and library auto-cleaning.
Notes for using Veeam on Windows Server 2019.
Notes on device drivers for SCDPM2012.
System settings for SCDPM2012.
How to improve backup performance by adjusting block size.
Notes on operating the LTFS option.
How to clean tape drives using the LTFS option.
Notes regarding the installation of the LTFS option.
Recommendations for the LTFS server OS configuration.
To Next Page
General