Need help?Do you have a question about the Fujitsu ETERNUS JX40 S2 and is the answer not in the manual?
General| Model | ETERNUS JX40 S2 |
|---|---|
| Category | Storage |
| RAID Levels | 0, 1, 5, 6, 10, 50, 60 |
| Controller Type | Dual Controller |
| Form Factor | 2U |
| Humidity | 20% to 80% (non-condensing) |
| Drive Types | SAS, SATA |
| Host Interfaces | 6 Gb/s SAS |
| Power Supply | Redundant Power Supply |
| Cache Memory | 2GB |
| Dimensions (H x W x D) | 88 x 483 x 670 mm |
| Weight | Approx. 30 kg |
| Operating Temperature | 5 - 35 °C |
Target audience and necessary prerequisites for understanding the manual.
Overview of the manual's chapters and content organization.
Lists other related documents for further information.
Explains symbols, text formatting, and icons used in the manual.
Provides specifications, environmental data, and compliance details.
Critical safety precautions for handling and operating the storage subsystem.
Identifies components sensitive to static discharge and handling instructions.
States compliance with EC directives for electromagnetic compatibility and low voltage.
Compliance statement regarding radio frequency interference for Class A digital devices.
Safety and procedural guidance for installing the subsystem in a rack.
Instructions for safely transporting the storage subsystem.
Information on product design, energy saving, packaging, and disposal.
An overview of the steps required for installing the storage subsystem.
Procedures for safely unpacking the storage subsystem and checking contents.
Detailed instructions for mounting the storage subsystem into a server rack.
Guidance on how to power the storage subsystem on and off.
Describes the operation panel and its indicators on the front of the subsystem.
Details the ports and components located on the rear of the subsystem.
Precautions and best practices for handling sensitive hard disk drives.
Procedures for replacing or installing hard disk drives and drive dummies.
Instructions for connecting the storage subsystem via SAS cables.
Guidance on connecting the power cables to the subsystem and power sources.
Describes a basic setup with a RAID controller or HBA.
Details configurations for RAID/HBA with maximum storage capacity.
Explains configurations for RAID/HBA with dual data paths.
Describes redundant controller and storage setups with dual data paths.
Details redundant configurations for file sharing environments.
Provides troubleshooting steps for common faults and errors.
Step-by-step instructions for replacing the power supply unit.
Guidance on how to replace the Input/Output module.
Instructions for removing and replacing the front operation panel.
To Next Page