Need help?Do you have a question about the Fujitsu Storage ETERNUS AF650 S2 and is the answer not in the manual?
General| Model | ETERNUS AF650 S2 |
|---|---|
| Category | Storage |
| Form Factor | 2U |
| Drive Bays | 24 |
| Drive Types Supported | SSD |
| Data Reduction Features | Deduplication, Compression |
| Maximum Capacity | 4.6 PB |
| Supported Drives | SAS SSD |
| Host Interface | FC, iSCSI, FCoE |
| Interface | SAS |
| RAID Levels Supported | 0, 1, 5, 6, 10 |
| Power Supply | Redundant power supplies |
| Cooling | Redundant fans |
| Weight | 35 kg |
| Storage Type | All-Flash Array |
Details the components of the controller enclosure, including front, rear, and internal parts, and their LEDs.
Describes the components of the drive enclosure, covering front, rear, drives, I/O modules, and power supply units.
Explains the front and rear views of the 19-inch rack, used for installing enclosures.
Details the 1U and 2U power distribution units, including outlets and inlets.
Provides instructions on opening and closing the front and rear doors of the 19-inch rack.
Explains how to switch the main line and PSU switches on/off for powering the system.
Describes how to use setting change switches for maintenance and factory default restorations.
Explains how to check the operational status of the ETERNUS AF using LEDs.
Details how to monitor system status, RAID groups, and TPPs using the Web GUI.
Describes how to check system status and component states using the ETERNUS CLI commands.
Explains methods for notifying events like errors via e-mail, SNMP Trap, Syslog, etc.
Describes how to configure and send audit logs of operations and system actions to a Syslog server.
Provides estimated times for volume formatting based on RAID level and drive configuration.
Shows estimated times for rebuild and copyback processes for different RAID levels.
Emphasizes the importance of regular data backup to prevent data loss.
Explains the requirements and procedures for ETERNUS AF maintenance service.
Covers the replacement cycle and checking time for expendable batteries.
Details related services like Remote Support for detecting and notifying errors.
Provides a list of checks for common issues like power, LEDs, connectivity, and server recognition.
Lists essential information to prepare before contacting a maintenance engineer for troubleshooting.
To Next Page