Need help?Do you have a question about the Fujitsu ETERNUS DX100 S3 and is the answer not in the manual?
General| HDD speed | 10000 RPM |
|---|---|
| RAID levels | 1, 1+0, 5, 5+0, 6 |
| Data transfer rate | 16 Gbit/s |
| Storage drive size | 2.5 \ |
| Storage drive capacity | 600 GB |
| Storage drive interface | Serial Attached SCSI (SAS) |
| Storage drives installed | Yes |
| Installed storage drive type | HDD |
| Supported storage drive types | HDD & SSD |
| Total installed storage capacity | 6 TB |
| Maximum supported storage capacity | - TB |
| Number of storage drives installed | 10 |
| Number of storage drives supported | - |
| Chassis type | Rack (2U) |
| Certification | UL 60950-1, CSA-C22.2 No. 60950-1, EN 60950-1, IEC 60950-1, GOST-R\\r CNS 13438, FCC CFR 47 class A , ICES 003 Class A, EN 55022 Class A, VCCI Class A, AS/NZS CISPR 22 Class A\\r CB, CE, C-Tick, FCC, GOST, GS, VCCI |
| Product color | Black |
| Sustainability certificates | RoHS |
| Number of power supply units | 1 |
| Operating altitude | 0 - 3000 m |
| Storage temperature (T-T) | 0 - 50 °C |
| Operating temperature (T-T) | 10 - 40 °C |
| Storage relative humidity (H-H) | 8 - 80 % |
| Operating relative humidity (H-H) | 20 - 80 % |
| Host ports | 4 |
| Device class | Small & Medium Business |
| Supported network protocols | iSCSI |
Weight and Dimensions| Depth | 645 mm |
|---|---|
| Width | 482 mm |
| Height | 88 mm |
| Weight | 35000 g |
To Next Page