Fujitsu ETERNUS DX100 S3 - Create Eco-Mode Schedule

Chapter 1 System Management
1.6 Eco-mode Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
76
2 Specify the parameters.
The main setting item is as follows.
● Eco-mode General Setting
• Eco-mode
3 Click the [Set] button.
 A confirmation screen appears.
4 Click the [OK] button.
 The application of the Eco-mode general settings starts.
5 Click the [Done] button to return to the [Eco-mode] screen.
End of procedure
1.6.2 Create Eco-mode Schedule
This function specifies the disk operating time (term for activating disk motor constantly) as an Eco-mode
schedule.
• Up to 64 Eco-mode schedules can be created for each storage system.
• Up to eight events can be specified for a single Eco-mode schedule.