Appendix A Parameter List
A.3 Volume Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
795
● Select RAID Groups
• Checkbox to select RAID groups
A.3.2 Rename Volume
For details about this function, refer to "3.3 Rename Volume" (page 274).
For the factory default settings for this function, refer to "Appendix B Rename Volume" (page 989)
.
● Rename Volume
• Name
• Start of Suffix
Description Select the checkbox for the RAID group to be selected.
Input condition/
Display contents
Checkbox
• Selected
• Cleared
Description Input a new volume name.
Volume names starting with "$SYSVOL" or "$VVOL_META" cannot be used.
Input condition/
Display contents
Up to 16 alphanumeric characters and symbols (except "," (comma) and "?")
Description Input the suffix starting number to be added to the new volume name.
When changing multiple volume names, the suffix number is added to the volume
names with consecutive numbers in ascending order starting with the entered suffix
number. Refer to "Naming conventions for renaming volumes" (page 1052)
for details.
When changing only one volume name, "Start of Suffix" is not displayed.
Input condition/
Display contents
• Numeric characters (0 - 99999)
• Decimal number
• 1 - 5 digits
To Next Page
Loading...
