Fujitsu ETERNUS DX100 S3 - Add Role

Chapter 1 System Management
1.7 User Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
92
3 Click the [Modify] button.
 A confirmation screen appears.
4 Click the [OK] button.
 Setting of the RADIUS Authentication starts.
5 Click the [Done] button to return to the [Define Role] screen.
End of procedure
1.7.4 Add Role
This function combines several user policies and creates a user-specific role (custom role).
Up to 20 roles can be created per storage system.
Policy
The 16 types of access privileges shown below are available.
If an error screen appears under the following conditions, check the parameter settings.
• When each parameter fails to satisfy the input conditions
• When the primary server is not specified
• When there is an unspecified parameter for the server
• When the "Domain Name / IP Address" of the Primary server overlaps with that of the Secondary
server
An error screen appears if the specified IP address of the RADIUS server conflicts with the internal IP
address of the ETERNUS DX. If this occurs, check the parameter settings.
Policies Description
Status Display Status display functions (storage system status, RAID group list, volume list,
copy session list, etc.)
RAID Group Management RAID group, Thin Provisioning Pool, Eco-mode, hot spare disk setting
functions, etc.
Volume - Create / Modify Volume setting functions (register/modify/expand), etc.
Volume - Delete / Format Volume setting functions (delete/format), etc.
Host Interface Management Host interface management functions (host group settings, port group
settings, LUN group settings, host affinity settings), etc.
NAS Management NAS setting functions (create NAS interface, create NAS shared folders), etc.
Advanced Copy Management Local Advanced Copy setting functions, Remote Advanced Copy setting
functions, etc.
Copy Session Management Advanced Copy session management functions (start/stop/delete), etc.
Storage Migration Management Storage Migration setting functions (start/suspend/stop/restart/delete path),
etc.