EasyManua.ls Logo

Fujitsu ETERNUS AF S3 Series - User Manual

Fujitsu ETERNUS AF S3 Series
89 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
FUJITSU Storage
ETERNUS AF S3 series
All-Flash Arrays
Operation Guide (Basic)
Operation management/maintenance
P3AG-4072-02ENZ0

Table of Contents

Other manuals for Fujitsu ETERNUS AF S3 Series

Preview: Configuration Guide
Configuration Guide75 pages

Questions and Answers

  • C
    Chelsea MartinezAug 11, 2025
    How to fix Fujitsu ETERNUS AF S3 ETERNUS AF when it cannot be connected via a network service?
    • J
      jamesmontgomeryAug 11, 2025
      If your Fujitsu Storage ETERNUS AF cannot connect via a network service, there are several potential causes and solutions: * Ensure the ETERNUS AF is turned on. * Check the LAN cable connections to ensure they are properly connected and connected to a LAN port of a controller with a MASTER LED turned on. * Verify that network devices (like LAN switches or routers) are functioning correctly and have valid settings. * Confirm that the environment settings for the network service are valid. * Check that the IP address is correct. * If the settings for the ETERNUS AF LAN ports (firewall) are invalid, restore the default values for the network environment and firewall settings.
  • J
    Joshua PattersonAug 23, 2025
    What to do if Fujitsu ETERNUS AF S3 ETERNUS AF refuses to turn on?
    • X
      xstephensonAug 23, 2025
      If your Fujitsu Storage ETERNUS AF refuses to turn on, consider the following possible causes: * Check if the power cord is disconnected and ensure it is properly connected. * Verify that the PSU switch on the power supply unit is turned ON. * Ensure the main line switch of the power distribution unit is turned ON. * Check for any power failure issues. * Ensure the mini SAS HD cable between enclosures is connected.
  • J
    Jennifer NixonAug 28, 2025
    Why is my Fujitsu ETERNUS AF S3 ETERNUS AF turned off?
    • D
      Dawn JohnsonAug 28, 2025
      Your Fujitsu Storage ETERNUS AF might be turned off due to several reasons: * The power cord might be disconnected. Check the power cord. * The PSU switch of the power supply unit might be turned to OFF. Ensure the PSU switch is turned ON. * The server might be turned off. If power is controlled using a power synchronized unit, turn the server on. * The main line switch of the power distribution unit might be turned OFF. Turn ON the main line switch. * There might be a power failure. Check for power supply issues. * There might have been a recent main power failure. If the Power Resume function is enabled, the ETERNUS AF turns on automatically after the power is restored.
  • B
    brennanloriSep 3, 2025
    What to do if the READY LED is not on in Fujitsu Storage ETERNUS AF?
    • C
      Carol BernardSep 3, 2025
      If the READY LED is still not on after a certain time since the power of the ETERNUS AF was turned on, contact your maintenance engineer.
  • S
    simondavidNov 16, 2025
    Why is I/O access slow on my Fujitsu ETERNUS AF S3 Storage ETERNUS AF?
    • K
      Kenneth GarciaNov 16, 2025
      Slow I/O access on your Fujitsu Storage ETERNUS AF can be caused by several factors: * A low battery charge rate or an expired battery replacement time can degrade performance by changing the cache to Write Through mode. Check the battery status using the ETERNUS Web GUI. * If an abnormality is detected, check the icon of each part on the [Storage] screen of [Component] of ETERNUS Web GUI. * The transfer rate of the FC port may be different from the server or the FC switch. Check the transfer rate of the FC port and set the same transfer rate as the server or FC switch. * Check the path status. * If the ETERNUNMultipath Driver is used, start ETERNUS Multipath Manager. * If the ETERNUS Multipath Driver is not used, check the path status by using the path management tool. * Ch...

Fujitsu ETERNUS AF S3 Series Specifications

General IconGeneral
SeriesETERNUS AF S3 Series
Storage TypeAll-Flash Array
Data ReductionDeduplication, Compression
Controller TypeDual Active-Active
InterfaceFibre Channel, iSCSI, SAS
RAID SupportRAID 5, RAID 6, RAID 10
Data ProtectionSnapshots, Replication
Management InterfaceCLI
Power SupplyRedundant Power Supplies
Management SoftwareETERNUS SF

Related product manuals