Fujitsu ETERNUS AF S3 Series - Figure 26 2.5 Drives; Table 20 Status and Meaning of each LED (Drive)

■
Drives
2.5" drives have LEDs.
Figure 26 2.5" Drives
DRIVE FAULT LED
DRIVE READY LED
2.5" drive
The LEDs turn on or blink to indicate the statuses that are listed below.
Table 20 Status and Meaning of Each LED (Drive)
LED name LED status Meaning
DRIVE READY
(green)
The drive is in normal status.
(blinks green)
DRIVE FAULT
(amber)
• The drive is in error status.
• The LED light up operation was performed from the ETERNUS CLI
command line in order to identify the drive location.
A. Component Names
Drive Enclosure
84 Operation Guide (Basic)