Drive Enclosure Handling Instructions
■
About Condensation
• When moving a drive enclosure from a cold place, such as an unconditioned store
house in winter, to a warmer place such as an air-conditioned room, the severe
temperature change may result in condensation forming.
To avoid this, allow the packed drive enclosure sufficient time in the warmer place
(one hour for each 15
°C of temperature difference) to adapt to the new
temperature.
■
About Static Electricity
• When handling drive enclosures, wear a wrist strap or touch a metal part to
discharge the human body's natural static electricity. Failure to discharge static
electricity may cause failure in the ETERNUS AF.
■
About Shock
• Do not handle the drive enclosure roughly or subject it to physical shocks when
laying it down.
• Do not stack the drive enclosures.
• Do not knock or drop the drive enclosure on hard objects.
Additional Drive Enclosure Installation Procedure
This section explains how to install additional drive enclosures in the ETERNUS AF.
4. Component Expansion/Function Enhancement
Installing Additional Drive Enclosures
35 Operation Guide (Basic)
To Next Page
Loading...
Need help?
General