Fujitsu ETERNUS AF S3 Series - Drive Enclosure; Front; Rear; Figure 23 Front View of a 2.5 Type Drive Enclosure

Drive Enclosure
Drives and an operation panel are installed in the front of the drive enclosure. I/O modules and power supply
units are installed in the rear.
Front
This section provides the names of the components in the front of a drive enclosure.
■
2.5" Type
Figure 23 Front View of a 2.5" Type Drive Enclosure
Slot#0 Slot#1 Slot#2 Slot#3 Slot#4 Slot#5 Slot#6 Slot#7 Slot#8 Slot#9
Slot#10 Slot#11 Slot#12 Slot#13 Slot#14 Slot#15 Slot#16 Slot#17 Slot#18 Slot#19 Slot#20 Slot#21 Slot#22 Slot#23
1
3 3
2
1 Operation panel (refer to "
■ Operation Panel" (page 83))
2 2.5" drive (refer to "■ Drives" (page 84))
3 Flange cover
Rear
This section provides the names of the components on the rear of a drive enclosure.
■
2.5" Type
Figure 24 Rear View of a 2.5" Type Drive Enclosure
1 1
2 2
IOM#1IOM#0
PSU#0 PSU#1
1 I/O modules (IOM#0, IOM#1) (refer to "■ I/O Modules
" (page 85))
2 Power supply units (PSU#0, PSU#1) (refer to "■ Power Supply Units" (page 86))
A. Component Names
Drive Enclosure
82 Operation Guide (Basic)