Fujitsu ETERNUS AF S3 Series - Figure 21 Host Interface Ports (ETERNUS AF650 S3); Table 17 Status and Meaning of each LED (Host Interface for the ETERNUS AF650 S3)

● ETERNUS AF650 S3
There are four types of host interfaces: FC 32Gbit/s, FC 16Gbit/s, and iSCSI 10Gbit/s (10GBASE-SR/10GBASE-
CR).
Figure 21 Host Interface Ports (ETERNUS AF650 S3)
FC 4 ports
iSCSI 10Gbit/s (10GBASE-CR)
(f
or Copper Twinax cable connection)
FC 2 ports
iSCSI 10Gbit/s (10GBASE-SR)
LINK/FAULT LED
CA FAULT LED
CA READY LED
LINK/FAULT LED
LINK/FAULT LED
Port#0 Port#1 Port#0 Port#1
Port#2 Port#3
Port#0 Port#1
The states of LEDs are listed below.
Table 17 Status and Meaning of Each LED (Host Interface for the ETERNUS AF650 S3)
LED name LED status Meaning
CA FAULT
(amber)
The host interface is in error status.
CA READY
(green)
The host interface is in normal status.
LINK/FAULT
(green)
The link between the host interface port and the destination
port has been established.
(amber)
The host interface port is in error status.
A. Component Names
Controller Enclosure
80 Operation Guide (Basic)