Fujitsu ETERNUS AF S3 Series - 2 Storage System Monitoring; Checking LED Status; Displaying Status Via ETERNUS Web GUI; Figure 7 ETERNUS Web GUI Screen (Example: ETERNUS AF650 S3)

2. Storage System Monitoring
This chapter describes the status monitoring of the ETERNUS AF.
Checking LED Status
The status of the ETERNUS AF can be checked by the LEDs.
If the FAULT LED in the operation panel is amber, contact your maintenance engineer.
Displaying Status via ETERNUS Web GUI
The status of the ETERNUS AF and the usage status of RAID groups, TPPs, and SDPs can be checked in the
Overview screen of ETERNUS Web GUI.
Figure 7 ETERNUS Web GUI Screen (Example: ETERNUS AF650 S3)
Table 3 shows the general status.
Status of the ETERNUS AF is monitored periodically, and the result is displayed as a general status icon with
character strings.
Table 3 General Status of ETERNUS Web GUI
Status Description
(green)
The ETERNUS AF is in a normal state.
(red)
An abnormality is detected at a power-off, and I/O access from the server cannot
be received.
(red)
The ETERNUS AF is in error state.
23 Operation Guide (Basic)