Adding Servers
To add a server in the ETERNUS AF and newly connect the server to the ETERNUS AF, preparation is required.
RAID Group Creation
Create RAID groups in order to create volumes to be used by the added server.
If free space in an existing RAID group is used, this procedure can be omitted.
The procedure to register a RAID group is as follows:
1 Click the [RAID Group] tab on the navigation of the ETERNUS Web GUI screen.
The [RAID Group] screen appears.
2 In [Action], click [Create].
The [Create RAID Group] screen appears.
3 Enter the name of the RAID group that is to be registered and select "Automatic" or "Manual" for "Create
Mode".
When "Automatic" is selected, the settings for "Automatic Setting" are displayed.
When "Manual" is selected, the settings for "Manual Setting" are displayed.
4 Set the required items and click the [Create] button.
A confirmation screen appears.
5 Click the [OK] button.
The RAID group is registered and the registration completion screen appears.
6 Click the [Done] button.
The screen returns to the [RAID Group] screen.
4. Component Expansion/Function Enhancement
Adding Servers
52 Operation Guide (Basic)
To Next Page
Loading...
Need help?
General