Fujitsu ETERNUS AF S3 Series User Manual

11 Turn on the
ETERNUS AF.
Refer to "Powering On" (page 17) for details on how to turn on the ETERNUS AF.
12 Check that the PORT LINK/FAULT LED for the FC port on the replaced Long wave SFP+ module (16Gbit/s)
turns off or lights up green.
13 Start ETERNUS Web GUI to check the status of the newly added Long wave SFP+ module (16Gbit/s).
On the Internal Parts information in the [Channel Adapter Details] screen of ETERNUS Web GUI, check
that the FC port status is Normal and the SFP type is changed to "16G SFP+(SMF)". In addition, confirm
that all of the other components are in normal status.
4. Component Expansion/Function Enhancement
Installing Long Wave SFP+ Modules (16Gbit/s)
51 Operation Guide (Basic)

Fujitsu ETERNUS AF S3 Series Specifications

General

Brand	Fujitsu
Model	ETERNUS AF S3 Series
Category	Storage
Language	English