5 To install more additional drives, repeat Step 3 and Step 4.
6 If a wrist strap is used, remove the wrist strap.
7 In the [Drives] screen of [Component] on the ETERNUS Web GUI screen, check that the added drives have
been recognized.
8 Set up RAID groups, volumes, hot spares, and host affinity settings, as required.
Installing Additional Drive Enclosures
Drive enclosures can be installed while the system is running without affecting operations.
This section explains how to install drive enclosures in the ETERNUS AF
.
• Customers are not allowed to install drive enclosures to the ETERNUS AF650 S3. To
install drive enclosures, contact your sales representative or maintenance
engineer.
• Do not uninstall or move a drive enclosure that is already installed.
Contact your sales representative or maintenance engineer if a drive enclosure
needs to be uninstalled or moved.
• When installing the ETERNUS AF
, secure the rack to the floor to prevent the rack
from moving out of place or from toppling over. For details on the rack installation
requirements, refer to "Site Planning Guide".
Installable Drive Enclosures
For installable drive enclosures, refer to "Product List".
4. Component Expansion/Function Enhancement
Installing Additional Drive Enclosures
34 Operation Guide (Basic)
To Next Page
Loading...
