Fujitsu ETERNUS DX100 S3 - Release Host-LU Qos

Chapter 4 Connectivity Management
4.7 Host-LU QoS Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
485
7 Click the [Done] button to return to the [Host-LU QoS] screen.
End of procedure
4.7.4 Release Host-LU QoS
This function releases the LU QoS groups that are assigned to a "Host - CA Port - LUN Group" with host affinity
settings.
The procedure to release Host-LU QoS is as follows:
Procedure
1 Select the "Host - CA Port - LUN Group" for which the Host-LU QoS is to be released (multiple
selections can be made) and click [Release Host-LU QoS] in [Action].
 A confirmation screen appears.
2 Click the [OK] button.
 Releasing of the Host-LU QoS starts.
3 Click the [Done] button to return to the [Host-LU QoS] screen.
End of procedure
If a "Host - CA Port - LUN Group" for which an LU QoS group is not assigned is selected, the [Release Host-LU
QoS] function cannot be used.