Chapter 4 Connectivity Management
4.7 Host-LU QoS Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
484
3 Select a LUN QoS group.
The main setting item is as follows.
● Select LU QoS Group
• Select LU QoS Group
4 Click the [OK] button.
The display returns to the initial screen.
5 After confirming the association between "Host", "CA Port", and "LUN Group : LU QoS Group
No.", click the [Set] button.
A confirmation screen appears.
6 Click the [OK] button.
The Host-LU QoS setting starts.
To Next Page
Loading...
