Fujitsu ETERNUS DX100 S3 - Add Fc;Fcoe Host

Chapter 4 Connectivity Management
4.2 Host Group Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
405
(6) After adding or deleting SAS hosts is complete, click the [Modify] button.
 A confirmation screen appears.
4 Click the [OK] button.
 Modification of the SAS host group starts.
5 Click the [Done] button to return to the [Host Group] screen.
End of procedure
4.2.9 Add FC/FCoE Host
This function registers a new FC/FCoE host (HBA).
The following list shows the maximum number of hosts (*1) that can be registered for each ETERNUS DX
model.
*1: The total number of hosts irrespective of the interface types.
• ETERNUS DX60 S3
128
• ETERNUS DX100 S3/DX200 S3
1024
• ETERNUS DX500 S3/DX600 S3
1024
• ETERNUS DX8700 S3/DX8900 S3
8192
• ETERNUS DX200F
1024