Fujitsu ETERNUS DX100 S3 - A.6.2 Create Thin Provisioning Pool

Appendix A Parameter List
A.6 Thin Provisioning Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
923
A.6.2 Create Thin Provisioning Pool
For details about this function, refer to "6.2 Create Thin Provisioning Pool" (page 559).
For the factory default settings for this function, refer to "Appendix B Create Thin Provisioning Pool" (page
1006).
● New Thin Provisioning Pool
• Name
• Create Mode
● Automatic Setting
• Drive Type
Description Input a TPP name.
An existing TPP name cannot be specified.
Input condition/
Display contents
• Up to 16 alphanumeric characters and symbols (except "," (comma) and "?")
• Spaces
Description Select a create mode of a TPP.
Input condition/
Display contents
• Automatic
• Manual
Description Select the type of drive that configures the TPP.
Input condition/
Display contents
• Online
• Nearline
• SSD
• Online SED
• Nearline SED
• SSD SED