Chapter 3 Volume Management
3.10 Stop RAID Migration
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
312
3.10 Stop RAID Migration
This function stops migration.
The procedure to stop migration is as follows:
1 Select the volume for which migration is to be stopped (multiple selections can be made)
and click [Stop RAID Migration] in [Action].
A confirmation screen appears.
2 Click the [OK] button.
The RAID migration stops.
3 Click the [Done] button to return to the [Volume] screen.
This function cannot be executed when migration is not being performed for the selected volume.
• If migration is canceled, the reservation for FTV/TPV capacity optimization is released.
• When migration is stopped, data in the migration source volume can be accessed normally.
To Next Page
Loading...
