Appendix A Parameter List
A.3 Volume Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
781
A.3 Volume Management
This section provides information on the parameters of the following actions for volume management.
• Create Volume
• Rename Volume
• Expand Volume
• Expand Thin Provisioning Volume
• Modify Thin Provisioning Volume Threshold
• Set Allocation
• Start RAID Migration
• Modify Cache Parameters
• Set ALUA
• Set Volume QoS
• Set Snapshot
A.3.1 Create Volume
For details about this function, refer to "3.1 Create Volume" (page 253).
For the factory default settings for this function, refer to "Appendix B Create Volume" (page 988)
.
● New Volume
• Name
Description Input the volume name.
An existing volume name cannot be specified. Volume names starting with "$SYSVOL" or
"$VVOL_META" cannot be used.
When creating multiple volumes at the same time, the new volumes are named
automatically.
Refer to "Naming conventions for creating volumes" (page 1052)
for details.
Input condition/
Display contents
• Up to 16 alphanumeric characters and symbols (except "," (comma) and "?")
• Spaces
To Next Page
Loading...
