Appendix A Parameter List
A.6 Thin Provisioning Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
931
A.6.3 Rename Thin Provisioning Pool
For details about this function, refer to "6.4 Rename Thin Provisioning Pool" (page 569).
For the factory default settings for this function, refer to "Appendix B Rename Thin Provisioning Pool" (page
1007).
● Rename Setting
• Name
• Start of Suffix
A.6.4 Expand Thin Provisioning Pool
For details about this function, refer to "6.5 Expand Thin Provisioning Pool" (page 571).
For the factory default settings for this function, refer to "Appendix B Expand Thin Provisioning Pool" (page
1007).
● Automatic Setting
• Total Capacity after expand
Description Input a new TPP name.
When changing the name of a single TPP, an existing TPP name cannot be used.
Input condition/
Display contents
• Up to 16 alphanumeric characters and symbols (except "," (comma) and "?")
• Spaces
Description Input the starting number of the suffix that is to be added to the new TPP name.
When changing multiple TPP names, the suffix number is added to the TPP names with
consecutive numbers in ascending order starting with the entered suffix number. Refer
to "Naming conventions for renaming volumes" (page 1052)
for details.
When changing only one TPP name, the "Start of Suffix" field is not displayed.
Input condition/
Display contents
• Numeric characters (0 - 99999)
• Decimal number
• 1 - 5 digits
Description Input the total capacity of the TPP after expansion and select either "TB" or "GB" for the
capacity.
Drives are automatically selected according to the existing RAID group specifications,
and the TPP capacity is expanded to the entered value or higher. For the maximum
capacity of TPP, refer to "The maximum number of pools and maximum pool capacity for
each model" (page 559).
Input condition/
Display contents
• Numeric characters
• GB/TB
To Next Page
Loading...
