Fujitsu ETERNUS DX100 S3 - Site Planning Guide Manual

To Next Page

FUJITSU Storage

ETERNUS DX100 S4/DX200 S4,

ETERNUS DX100 S3/DX200 S3

Hybrid Storage Systems

Site Planning Guide

Requirements for transportation/installation

P3AM-7632-18ENZ0

Main Page

Table of Contents2
ETERNUS DX Installation7
Installation Specifications7
Eternus Dx100 S47
Table 1 ETERNUS DX100 S4 Installation Specifications7
Eternus Dx100 S310
Table 2 Efficiency and Power Factor of the Power Supply Unit (ETERNUS DX100 S4)10
Table 3 ETERNUS DX100 S3 Installation Specifications10
Eternus Dx200 S413
Table 4 ETERNUS DX200 S4 Installation Specifications13
Table 5 Efficiency and Power Factor of the Power Supply Unit (ETERNUS DX200 S4)15
Eternus Dx200 S316
Table 6 ETERNUS DX200 S3 Installation Specifications16
Storage System Dimensions19
Figure 1 2.5" Type Controller Enclosure Dimensions19
Figure 2 3.5" Type Controller Enclosure Dimensions20
Figure 3 2.5" Type Drive Enclosure Dimensions21
Figure 4 3.5" Type Drive Enclosure Dimensions22
Figure 5 High-Density Drive Enclosure Dimensions23
Compliance Standards24
Package Size25
Table 7 Package Size (for Regions Other than the EMEIA, Central American, and Caribbean Regions)25
Installation Area26
Figure 6 Installation Area and Service Area26
Figure 7 Installation and Service Areas (When a High-Density Drive Enclosure Is Installed_1)26
Figure 8 Installation and Service Areas (When a High-Density Drive Enclosure Is Installed_2)27
Figure 9 Service Area (When a High-Density Drive Enclosure Is Installed in the Top Part of the Rack)27
Installation Environment28
Installation of the ETERNUS DX in High Altitude Locations28
Air Conditioning28
Installation Methods29
Load Bearing Capacity for Floors29
Outlet/Socket Specifications29
Specifications for Optional Power Supply Products30
Table 8 Current Consumption of each Power Cord30
Table 9 Specifications for AC200V Power Cords (for the EMEIA, Central American, and Caribbean Regions)30
Table 10 Specifications for AC200V Power Cords (for Regions Other than the EMEIA, Central American, and Carib- Bean Regions)31
Table 11 Specifications for AC125V Power Cords (for Regions Other than the EMEIA, Central American, and Carib- Bean Regions)31
Table 12 Specifications for AC100V and AC200V Power Cords31
Figure 10 Power Distribution Units (AC8A/200-240V, 1U, 4 Outlets, 2 Inlets)32
Figure 11 Power Distribution Units (AC24A/200-240V, 1U, 4 Outlets, 1 Inlet)32
Table 13 Specifications for Power Distribution Units (AC8A/200-240V, 1U, 4 Outlets, 2 Inlets)32
Table 14 Specifications for Power Distribution Units (AC24A/200-240V, 1U, 4 Outlets, 1 Inlet)32
Figure 12 Power Distribution Units (2U)33
Table 15 Power Distribution Unit (AC200-240V, 2U, 12 Outlets) Specifications33
Table 16 Power Distribution Unit (AC200-240V, 2U, 16 Outlets) Specifications33
Figure 13 Power Distribution Units (2U)34
Table 17 Power Distribution Unit (AC16A/200-240V, 2U, 16 Outlets) Specifications34
Table 18 Power Distribution Unit (AC24A/200-240V, 2U, 16 Outlets) Specifications34
Required Number of Outlets/Sockets35
Circuit Protectors35
Table 19 Required Conditions for Distribution Board Circuit Protectors35
Figure 14 Breaking Characteristics of Distribution Board Circuit Protectors36
Figure 15 Example of a Power Supply Connection When a Power Distribution Unit (1U) Is Used37
Figure 16 Example of a Power Supply Connection When a Power Distribution Unit (2U) Is Used38
Figure 17 Example of a Power Supply Connection When a Power Distribution Unit Is Not Used40
Input Power Supply Lines41
Figure 18 Dual-Line Power Supply (When Connecting to Power Sockets)41
Figure 19 Dual-Line Power Supply (When Connecting to a UPS Unit)41
Figure 20 Single-Line Power Supply (When Connecting to Power Sockets)42
Figure 21 Single-Line Power Supply (When Connecting to a UPS Unit)42
Figure 22 Single-Line Power Supply (When Connecting to a Power Socket and a UPS Unit)42
Rack Installation Specifications43
Rack Installation Requirements43
Placement in the Rack43
Table 20 Enclosure Installation Order43
Cable Connection44
Figure 23 Distance between each Enclosure and the Power Distribution Unit (Example)44
Table 21 Cable Lengths When Connecting each Enclosure to the Power Distribution Unit44
Figure 24 AC Cable Connection45
Table 22 Usage of Cables for Connecting Enclosures47
Figure 25 Connection Example 1 (2U de Connections in the same Rack)48
Figure 26 Connection Example 2 (Connections in Multiple Racks)49
Figure 27 Connection Example 3 (2U de Connections in the same Rack)50
Figure 28 Connection Example 4 (4U de Connections in the same Rack)51
Figure 29 Connection Example 5 (Connections When 2U and 4U des Are Used Together in the same Rack)52
Figure 30 Connection Example 6 (Connections in Multiple Racks)53
Installable Racks54
Fujitsu Racks54
Non-Fujitsu Racks54
Figure 31 Unit Installation Area55
Table 23 Specifications for the Unit Installation Area55

Fujitsu ETERNUS DX100 S3 - Site Planning Guide Manual

Table of Contents

Other manuals for Fujitsu ETERNUS DX100 S3

Related product manuals