Need help?Do you have a question about the Fujitsu ETERNUS DX100 S4 and is the answer not in the manual?
General| Number of Controllers | 2 |
|---|---|
| Operating Humidity | 20% to 80% (non-condensing) |
| Controller Type | Dual |
| Drive Type | SAS, SSD |
| Host Interfaces | 8/16 Gb Fibre Channel 1/10 Gb iSCSI 12 Gb SAS |
| RAID Levels | RAID 0, 1, 5, 6, 10 |
| Form Factor | 2U |
| Maximum Drive Bays | 1, 440 |
| Power Supply | Redundant power supplies |
| Operating Temperature | 5°C to 40°C |
Explains how to turn the ETERNUS DX system on and off.
Explains the procedure and precautions for installing new drives.
Details the process and safety measures for adding drive enclosures.
Details host group addition, port settings, and host affinity.
Emphasizes the importance and procedure for regular data backups.
Provides a checklist of common issues and initial checks for troubleshooting.
To Next Page
