Fujitsu ETERNUS DX100 S3 - Page 932

Appendix A Parameter List
A.6 Thin Provisioning Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
932
● RAID Group List
• Controlling CM
● Drive Selection ([Tabular] Tab)
• Checkbox to select drives
● Drive Selection ([Graphic] Tab)
• DE selection list box
Description Select the Controlling CM of the RAID group that is to be created.
""Automatic" and the normal CM number ("CE#x CM#y" or "CM#y") that is installed are
displayed (x: CE number, y: CM number).
Select "Automatic" for normal operations. When "Automatic" is selected, the Controlling
CM that is to be allocated is determined by the RAID group number. Refer to "Automatic
Controlling CM setting" (page 910) for details.
Input condition/
Display contents
• For the ETERNUS DX8700 S3/DX8900 S3
- Automatic
- CE#x CM#y
• For the other models
- Automatic
- CM#y
Description Select the checkbox for the drive to be selected.
When selecting drives, refer to "Requirements for selecting drives" (page 563)
.
Input condition/
Display contents
Checkbox
• Selected
• Cleared
Description Select the DE group.
Options are displayed in the list box when at least one CE or DE in the DE group is
installed in the ETERNUS DX.
Refer to "Options and DE groups for each model" (page 908)
for details.
Input condition/
Display contents
• DE#0x
• DE#1x
• DE#2x
• DE#3x
• DE#4x
• DE#5x
• DE#6x
• DE#7x
• DE#8x
• DE#9x
• DE#Ax
• DE#Bx